Air Boosters

Shenzhen IVS Flow Control Co.,Ltd is one of the leading air boosters manufacturers and suppliers in China,Website:http://www.sz-ivs.com, welcome to wholesale customized air boosters from our factory.AB & ABD Series Air Booster IVS offers a complete selection of air boosters for almost any application. From economical compact single-acting two and four-to-one models to double-acting two and five-to-one models we can size a unit or system to fit your exact requirement. The principle of the air booster works much the same as our liquid pumps in which a larger air drive piston is directly connected to a smaller pumping piston. The incoming air from the compressor drives the booster and also feeds the supply to the unit. Pressures can be boosted up to 680 psi on the single-acting AB-7 and as much as 850 psi on our double-acting ABD-5. All IVS air boosters are pre-lubricated at the factory and should not be used with inline air lubricators. Clean, dry air is very important as any grit, moisture, or foreign matter in the air supply can damage the high pressure components. A coalescing filter is recommended before the air supply and air drive inlet, which can be the same. Typically, air boosters are used to build up pressures for static holding applications. Under normal, intermittent duty, the air cycling valve should be inspected and re-lubricated after 500,000 cycles. For continuous operation the booster should not be operated at more than 40 cycles per minute and should be inspected and re-lubricated every 150,000 cycles or 60 operating hours. Typical Application Engine air starter systems Top off high pressure tires Release spring actuated brakes Increase maximum torque on small air tools Top off and maintain pressure in die cushions Increase marginal air pressure to valve actuators Extra force for small air clamps, roll tensioners, assembly machines and air pressesORDERING HIGH PRESSURE GAS BOOSTER      MODEL SELECTION CHARTModel No.Maximum Rated Air Supply (Ps)Maximum Rated Air Outlet (Po)Connection PortsStatic Outlet      Stall PressureActual Area RatioDisplacement Per Stroke      (in3 per cycle)Air DriveAir InletAir OutletAB-2150 psig300 psig1/4" NPT1/4" NPT2 Pa2:1`2.910.3 bar21 barAB-4150 psig600 psig1/4" NPT1/4" NPT4 Pa4:11.410.3 bar41 barAB-7150 psig700 psig1/4" NPT1/4" NPT7 Pa7:1.710.3 bar48 barABD-2 & ABD-2S150 psig300 psig3/4" NPT1/2" NPT1/2" NPTPa + Ps2:0122310.3 bar21 barABD-5150 psig855 psig3/4" NPT1/2" NPT1/2" NPT4.7 Pa + Ps4.7:128.210.3 bar59 barNote:Limited modelslisted. Please consult our Sales Representative for High Pressure Components if you don't see models that meet your requirement.